As recovery from Kokskübelkranbahn and blast furnace structure is I went back to the caster. There are in terms of detailing and adjustment are still some way to go.
The suspension has been refined for the ladle. In the ladle itself is one of the pans from the Trix-converter building. For the lateral valves of the pan had a pan of a Märklin-iron pan car believe as a parts donor to it.
The thin gray brace in the middle was a massive and replaced the model more appropriate support from 4mm PS.
three pillars are finished. The "hood" over the Gießbändern received her side frame construction of HP profiles. In the original, this construction serves as a guide during disassembly / assembly of the hood for maintenance.
the Gießbändern called pomace were attached. Usually U-shaped in cross-section open at the top, they are used to hold pigs, which have not fallen at the discharge end of their mold and the only later consider the return of the tape.
Because they are already in the model sees only from the side, I simply Quadrahtrohr remnants recycled from this and waive the above opening.
The whole mounted and equipped with color.
On the front of the rigidities and splashes have been fitted. These consist of a finger aufgetupftem Revell spatula. The whole thing was then a coat of paint in my current "favorite color" matt Humbrol 27th
0 comments:
Post a Comment