A real challenge is the Kokskübelkranbahn above the bunker.
The cornerstone of a crane rail side wear on the roof of the original foundry.
In my "early phase" I wanted to build the foundry so easily from parts of the Trix-converter building and before the Kokskübelkranbahn over the bunker and the S-system building simply like a pig in the place Auhagen Stako elements provide. Now it is somewhat prototypical go. However, my new pillar for a total compromise.
with me should be absolutely removed the roof and the whole Gießhallenkranbahn I wanted to not tear down again. So I removed some posts with the hacksaw and the new stuck.
Partially I must be the original Trix-pillars are but for reasons of stability ... Just compromise.
Even the original looks for some reason totally sick from - each segment has a different span and design.
The photo E plant building and electrical filters are located in the foreground.
All pillars are and the crane track segments are at least structurally complete. Now missing only the railing and a "few" pursuit.
The steel truss segment in 2 and 4 of the way, is completely self-built, the middle segment consists of three parts of a still-bridge.
Here I had to build the foundation area of the piers from scratch.
The whole thing with buildings.
What so sometimes a little color makes! The railings are tuned and makes the whole thing now slowly into what I think. In the "messy" section behind the silo is still such a strange Halter-/Trägergestell, so there the lack of color.
0 comments:
Post a Comment