Cinderella Themed Balloons

progress foundry casting machine casting machine

In the last few days It moved on to several places in the cast house. At the discharge end was the "hood", under which the cars are cool with just the two of Gießbändern fallen, still hot pig iron with water. Although it is my Baukünste not exactly be described as a precision model making, I would they were a year or two, not thought to bring such a complicated structure but rather the first place.

Gießbänder the discharge end, behind the "hood" with the two left-looking hood hoppers. From there, at some point by pipe to a chimney.

From (the time for the works removed) runway on the pig iron bunker seen
have the runway of the cast house (currently without a roof), I completely built at the beginning of my project from modified parts of the Trix-converter building, since they its main dimensions are closely related to the (estimated by me!) original dimensions appeared. Today I met the different look and arrangement of the pillars of any more, some of them disturb the bwi other fixtures. So had now believe the foremost pillar nearby, and is replaced by a position and appearance vorbildgetreueres model.



to comparison here the original situation



behind the casting did these two scales, they are still detailed and weathered.



here is my example that I work around some quite radical with the already built a "must". The brown building was built by me as the foundry closed down block. In fact, there is but an open area with pillars, which is quite cluttered with pallets (see original image). I've tried
So, without further damage to this area with a jigsaw! to open. On the photo I've also just seen that the cut is not straight. Do I probably ran it again.
The staircase with its door openings while I have also subsequently cut or installed.



Originally, this area is not as high as my model. The building has the right floor height, the floor is unfortunately too low - that will keep me more often. But is absolutely not change.

Wedding Program Verbage

In recent days I continued to work mainly in the casting machine and at the end of the hall collecting bins for various aggregates. Is again nearly a partial demolition and new construction, but you only treat anything.

here first an impression of the original:

casting crane during filling of the ladle. ;



discharge end



The discharge end of the casting machine was right a completely new platform, my old platform was lack of information and had a fantasy with reality, not too much. (If only the white polystyrene would not always outshone by the flash, you could see something!)



Here is the next time the Kippvorichtung result of the casting machine, but no function.





At the end of hall, there have been only the bunker back right pocket, in the center and include new Aggregates in different grain sizes. The old cobblestones in this area has been torn out and replaced with a Prototypical concrete interlocking pavers. Now here is the lack of color and patina. In the brown area to the left one comes out of the induction furnace.