Waterproofing - building - construction - Renovation - Basement - Roof - moisture
Concrete treatments:
damage to concrete structures, such as outbreaks require immediate treatment to restore the original properties. Exposed reinforcing steel corrosion protection must be treated. Mineral products with the original structure is restored.
Joint sealing:
joints within components are required to take part movements. Through a secure this component joint sealing joints are permanently elastic, dimensionally stable and UV-resistant sealed. This also enables future component movements, without causing damage.
damp and wet area sealing:
In these sensitive parts of the building lead to significant moisture damage in the entire object. Discoloration and flaking tiles are the first visible consequences. A full-scale seal out of such rooms to permanent protection.
It is sealed, the total area in the wall and floor areas seamlessly. The seal must bridge any cracks.
mold control:
by moisture penetration and cold spots occurring mold in homes causes serious damage to health, because the mold spores are released into the air and then inhaled by humans. A
special anti-mold system on a purely physical basis and free of antifungal toxins will lead to permanent protection, are growing because of this coating system no mold anymore.
floor coatings:
not only for aesthetic reasons, it is important to coat it, the bottoms of such garages. By colored protective coatings, these soils to mechanical damage and against the ingress of liquids are permanently protected.
facade protection: lead
weather and the resulting moisture penetration into the ground to damage to the facade. For the protection of such facades of mineral building materials are impregnations used, after which the surface is water repellent.
These water repellents penetrate deeply and dry residue, so that the optics will not be affected by the impregnation of the facade.
balcony and terrace waterproofing:
For this application made to the highest waterproofing requirements. So they must be weather resistant and waterproof, and guarantee a degree of static stability. Even outside connect to elevated structure movements, so it is imperative to use
sealing systems with high crack bridging capabilities.
waterproofing:
Roofs are exposed because of their prominent position significant temperature and weather-related stresses, cracking can be caused by stresses in the seal. Safe subsequent seals are required. It is vital to use products with high elasticity and high UV resistance.
tanks and pipes:
leaking sewage pipes run in all sewage installations to substantial damages, which are often detected late. During the renovation, it is necessary to respond to different claims with an adjusted each sealing system. The damage analysis is then, whether a
selective leak sealing is sufficient or whether an all-over coating is required to acids.
component desalination:
damaging salts lead to mechanical and chemical damage to the structure. By means of a destructive Kompressentechnologie minimize these salts in the ground.
special seals:
Special requirements require special solutions and experience. With its extensive know-how KOSTER is your partner for the development of such solutions.
applications
seals are used in many areas of the building trade are used. Whether it's sealing the use of Electricians or waterproofing of basements and more. The areas where
seal is then blown bennötigt here to enjoy relief which read what you want, and the electric field only as a mini example of this.
Tuesday, August 8, 2006
Chase Sapphire Commercial Skiing
Renovation - Basement - Roof - moisture
Typical seal cases for old buildings:
Wet basement, damp walls, mold, are all known consequences of missing or leaking seal. Clear that the seal here lasting solutions to hand.
But just in old buildings, the building by non-functioning seals are endangered in several parts of the building from basement to roof. In the following examples we will show you typical cases in which seal you can count on us:
on the seal.
External basement waterproofing:
wet basement can not be used and put the buildings. To the basement with a new, permanent safe seal to be reused, we offer three methods: from the outside by means of a polymer-modified thick coating or
cold self-adhesive waterproofing membrane while the entire exterior wall surface coated and thus protected from water entry. An alternative is the so-called veil or surface injection, when done outside the sealing of
the inside of the basement walls is. This method may in retrospect, ie for partial basements are carried out. In addition, in this case a sealing of the wall / floor union made with an injection.
basement waterproofing :
It will cellar interior surfaces without exposing the basement areas, ie without any excavation, inside sealed permanently. Even with running water, such seals be carried out. Over a given coating system, a pressure
made waterproof. In addition, after successful sealing a diffusible Restoration is applied.
Horizontal Waterproofing:
Rising damp in masonry will cause lasting serious damage. Signs are due to salt efflorescence flaking plaster, wallpaper and mouldering the formation of harmful mold. Based on a patented process will
eg by injection, has tabled a rot and permanently elastic synthetic resin into the masonry, so that a subsequent horizontal seal is given and no moisture can rise by capillary action.
crack injection:
component cracks are structural weaknesses. They shorten the life of the entire structure because the building is significantly weakened by water penetration. An elastic or non-positive crack closure is required.
This is filled by a pressure injection over the course of crack injection packer with a polyurethane resin. The applying injection resins are used in drinking water areas.
Typical seal cases for old buildings:
Wet basement, damp walls, mold, are all known consequences of missing or leaking seal. Clear that the seal here lasting solutions to hand.
But just in old buildings, the building by non-functioning seals are endangered in several parts of the building from basement to roof. In the following examples we will show you typical cases in which seal you can count on us:
on the seal.
External basement waterproofing:
wet basement can not be used and put the buildings. To the basement with a new, permanent safe seal to be reused, we offer three methods: from the outside by means of a polymer-modified thick coating or
cold self-adhesive waterproofing membrane while the entire exterior wall surface coated and thus protected from water entry. An alternative is the so-called veil or surface injection, when done outside the sealing of
the inside of the basement walls is. This method may in retrospect, ie for partial basements are carried out. In addition, in this case a sealing of the wall / floor union made with an injection.
basement waterproofing :
It will cellar interior surfaces without exposing the basement areas, ie without any excavation, inside sealed permanently. Even with running water, such seals be carried out. Over a given coating system, a pressure
made waterproof. In addition, after successful sealing a diffusible Restoration is applied.
Horizontal Waterproofing:
Rising damp in masonry will cause lasting serious damage. Signs are due to salt efflorescence flaking plaster, wallpaper and mouldering the formation of harmful mold. Based on a patented process will
eg by injection, has tabled a rot and permanently elastic synthetic resin into the masonry, so that a subsequent horizontal seal is given and no moisture can rise by capillary action.
crack injection:
component cracks are structural weaknesses. They shorten the life of the entire structure because the building is significantly weakened by water penetration. An elastic or non-positive crack closure is required.
This is filled by a pressure injection over the course of crack injection packer with a polyurethane resin. The applying injection resins are used in drinking water areas.
Subscribe to:
Posts (Atom)